CONTACT US
Urumqi Nantianya Electrical Complete-sets Equipment Co.,Ltd.
Add : 366 Tongbaishan Street, Economic and Technological Development Zone, Urumqi
Phone : 86-:13809951165
Service Phone :0991-4653766
Phone:0991-4658766
Fax:0991-4611577

PLC control cabinet





■ Overview
The inner frame of PS series Rittal cabinets are made of high quality cold-rolled steel plate and secondary-processed nine-fold bending columns. They are combined with steel inserts and welded double connections. The overhead rings are directly connected to the steel inserts to ensure the lifting strength of the frame. Load-bearing 600kg. All four sides of the enclosure can be removed, which is convenient for the installation of internal electrical equipment and multiple single cabinets. The frame column has a DIN mounting hole every 25mm, which makes it easier and faster to install and fix internal electrical components. The doors of the modular partitions of various heights (200-100m) can be installed on the front of the cabinet, which further expands the use of PS cabinets. The intuitive operation panel, modular internal structure, and easy-to-maintain sectional movable door structure make it a classic switchboard system control cabinet. The bottom plate has multiple movable covers to ensure convenient and flexible wiring. The base can be fixed or assembled. The perfect structure design makes the on-site installation and operation performance suitable for different control industries. The unique piano-type operation table determines the efficiency of the machine and the factory, and provides the most perfect working environment between the highly sensitive controller and the operator. Ensure the most economical operation of modern factories, widely used in power plant control, transportation, laboratory technology research and development and various tool manufacturing industries.
Protection class: IP54
Standard TCPS mechanical configuration:
1 set of body / 1 top cover / 1 front door / 1 back panel / 1 mounting plate / 2 side panels / 2 single-row side mold beams / simple packing
material:
Frame: 1.5mm thick nine-bend profile / Front door: 2.0mm cold-rolled steel plate / Back plate: 1.5mm cold-rolled steel plate / Mounting plate: 3.0mm cold-rolled steel plate
Side beam: 1.5mm thick cold-rolled steel plate
colour:
Frame: RAL7044 / Mounting plate: orange or galvanized / Cabinet: RAL7032 or RAL7035 / Base: RAL7022
■ Structural features
Frame body: Nine-bend profile frame body. The columns are punched with 25mm spaced modular holes to facilitate the installation and maintenance of electrical components.
Top cover: removable, with sealing tape inside, to facilitate the top of the cabinet to form the body.
Lifting ring: It is convenient for on-site dynamic lifting, with waterproof rubber pad inside, which can bear 600kg.
Mounting plate fixings: used for fixing the mounting plate, using M8 inner hexagonal screws for installation, the front and rear positions can be adjusted.
Door lock: Three-point lock of upper, middle and lower, more tightly lock the cabinet door.
Door bar: The strength of the door is reinforced. The door bar is punched with a modulus L, which is used in conjunction with electrical beams to facilitate field wiring.
Sealing strip: Polyurethane foaming sealing strip, dustproof and waterproof, increase protection level.
Front door: The front door is 25mm high on the ground, and the movable door panel can be opened 130 degrees.
Base: The base is welded or assembled, which is convenient for field lead and cable storage.
Bottom ring frame: installed at the bottom of the frame, and installed on the frame together with the base.
Side plate: The side plate is self-tapping, removable, and has sealing rubber strips inside.
Mounting plate: used to install electrical components. The front and rear positions of the mounting plate can be adjusted by modules.
Bottom cover: It is installed on the bottom of the cabinet and can be removed for easy wiring.